|
View Full Version : Any free G-Code graphing software? bdrmachine 09-12-2004, 08:32 PM I'm look for a program that will graph out my G-code with out having to install it on my mill. Free is best since I only want to verify my Vector Cam output. Many times I've found Vector code performing strangely on my mill. Thanks Brian :cool: Al_The_Man 09-12-2004, 09:04 PM This one is free http://www.cncsimulator.com/ Al mrainey 09-13-2004, 05:27 AM Discriminator is what I use at my day job. Trial version is free, no time limit. www.cncedit.com ynneb 09-13-2004, 05:38 AM Hey Al I downloaded that program and its great. Thanks for the link. imserv 09-13-2004, 11:57 AM I'm look for a program that will graph out my G-code with out having to install it on my mill. Free is best since I only want to verify my Vector Cam output. Many times I've found Vector code performing strangely on my mill. Brian, you can backplot a G-code program into an empty Vector drawing to see what will be cut. Fred Smith - IMService http://www.cadcamcadcam.com |