a good CNC foam cutter machine for cuting foam wings?

Hi,

Here is what I think is a well thought out and executed wire cutter. Including instructions on how to make it:
http://www.8linx.com/cnc/cnc.htm

Chris

More Links-
LiftZone article:
http://rcgroups.com/links/index.php?t=article&cat=240&id=4103
Ready assembled machine:
http://www.foamlinx.com/
Four axis controller. In French:(I haven't tried it)
http://www.teaser.fr/~abrea/cncnet/elec/mm2001/mmx.phtml

Cheers,
Chris

Hi CNCadmin,

l bought one of the complete kits from Tal at foamlinx.com. Spent a couple of evenings putting it together and works well straight out of the box.
Still learning the software and trying to increase the speed of the cuts but would recommend it, if you haven't time to put one together yourself.

Here's a couple of extra links

www.cenece.com (Spanish site you may need to translate it)

http://www.hobbycnc.com/exppackage.htm

http://www.het-holland.nl/

http://www.modelltechnik-jung.de/cnc/styro1.htm

Cheers

Fran

Hi
I'm running a FoamLinx.
Foam Linx (http://www.foamlinx.com/)

With the Muller software, and trying out Foam Works