I am looking for some one to make a one up prototype. Unfortunatly the only drawings I have right now are undimmensioned, orthographic and in .dxf or .dwg format. I can very easily make some 3d .dwg drawings but not many people work with .dwg when machining. If you are able to make the part and everything checks out im looking for a run of 50 initialy... Please email me for more information and the drawings. Be sure to include your information when you email.

Thanks
Brian

bdhowey@telus.net



http://brianmovies.ath.cx/Milling/Orthospyder2.JPG

You might have some problems finding someone to make that piece. It looks like the lower reciever for a hand gun. To make it and sell it you'd need a firearms manufacture license from Uncle Sam.

Unless of course I'm way off base here and it's the bumper bracket for a 72' Volvo wagon.

Your half right Dave, it is to a gun, paint ball gun!

Oh, I am sorry that is not politically correct, I mean paint ball marker :)

How do you tell the difference?

Just that I have seen similar frames on them, the extra large trigger guard, straight grip with no magazine well , there are just a few handguns with a straight grip like the UZI and Cobray and it is straight so the magazine will insert into it.

Could be wrong, and if I am, you have warned him :D

Now that te AWB has expired you should design in a bayonet lug, and collapsing stock. :cheers:

I would sorta appreciate it if you did not clutter my thread. :)

:stickpoke whatever.

Still looking for a machinist I now have solidworks files...

That part won't be cheap
Here is my website, I will do it if you wish. I also use SolidWorks.
Integrated Mechanical Services Inc (http://www.integratedmechanical.ca)

That one will take some doing. www.hobbymachine.net

I would like to quote that part. send 2d cad. dxf is fine.
rolinjunk@msn.com
later
rolin

Please email me again for the latest .IGS files.

Looking for a couple people to make some smaller parts now... please email me for more information.

I have finished some changes and have the part made in autocad if anyone can help me. I also have .igs and any other file associated with solidworks. Orthographics prints will be finished in a couple days.

http://brianmovies.ath.cx/frame/side5.jpg

Send parasolid and igs.

Thanks Mike
rfqmh@sbcglobal.net

zip & send SolidWorks

db.imsi@on.aibn.com

I would be interested in quoting those. I prefer solidworks files if you have them. I have solidworks 2005 and solidcam 2005. Also tolerances.

matt@kaisermedical.com

Orthographic prints will be done this weekend and will have the tolerances.

I would be interested in quoting...
igs solid and or dxf with tolerancing would be fine
Thanks

Phil
enquiries@tddinc.com

Found someone thanks to everyone who supplied a quote.