Just added a DRO Unit and a quick change post to my lathe. Now all I need is a 4" 4 Jaw chuck and I'm rockin'

DRO Unit.

http://www.mini-lathe.com/Mini_lathe/Reviews/Sieg_DRO/dro2.htm

Good stuff.

:cheers:

It's a nice add on I have that on my lathe as well and it works very well.

Do you think a 5" 4 jaw chuck is pushing it a little, or should I stick with the 4".

thx

I'm using a 4", I think 5" is pushing it a little.

I got a 3" and just chuck it in my 4", 3 jaw when I need it.

Eric