Hi
Can any body tell me how to Set up the tool carausel on a Okuma Howa Millac 5va. It has a Fanuc 6m control and a key pad below the tool carausel that you program in to tell witch tool is in what location. I've been playing with it for a week now and I haven't been able to figure it out yet. Thanks

DO YOU STILL NEED THIS INFORMATION? I JUST HAPPEN TO BE PUTTING BACK TOGETHER A MACHINE JUST LIKE THE ONE YOU MENTION, IT HAS THE ATC PROCEDURE PAPERS ALMOST COMPLETE. IF SO, DROP ME A LINE.

Hello SINUMERIKO,
Can I get any information about ATC procedure on how to Set up the tool carausel on a Okuma Howa Millac? I have been working around for them more than weeks but no succeed. Thanks. Aristo.

Hello Asuratman,

What model of Millac do you have?

Hello,
I actually have Okuma & Howa Millac 5C 1986 with Fanuc 6MB that might have the same operation on ATC catridge as millac 5V. Now, I am still redressing all hydraulic seals. Thanks. Asuratman.