Hello to every body, i want to show my little proyect, come from Spain, please excuse my bad english if there are question i try to answer
i take about one year to make it ( and continous.. it´s the neverless story :))
i used servos and ballscrews

A lots of photo
http://img.photobucket.com/albums/v219/tessen/FRESADORA/2211a003.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/2211a003-1.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/397acbe9.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/0daad668.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/7.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/8.jpg
http://img.photobucket.com/albums/v219/tessen/FRESADORA/L1.jpg
(the black thing in the botton of the colums are resine + carbide dust)

videos ( with little servos 28w each one)
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=1a87ca71.flv
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=100_4701.flv
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=100_5640.flv
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=5mm.flv
(deep 5mm)
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=prueba.flv
(deep 15mm)
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=b77c893f.pbr
http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=4a294b08.pbr

at the begining i think a litte maquine, but i make this, the motors are not apropiated, too little
and i change servos and controler, actualy i used G340 and servos (850 oz/in) with this motor i cand
take 20m/min (near 800in/min) but i used 15m/min (590 in/min)


http://img.photobucket.com/albums/v219/tessen/FRESADORA/motorcito.jpg
the old and the new servo

http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=100_6701.flv
testing, 3 axis come and return to the init position

http://smg.photobucket.com/albums/v219/tessen/FRESADORA/?action=view&current=100_6743.flv
test of a zero macro

saludos from Spain!

Hi tessen,

Nice machine!
Thank you for sharing all of the photos and videos. :)

-

Andy

Hola.
If you are interested, there is also a Spanish site here in the International forums.
Al.