Hello All,

We have a post processor for fanuc which was created 6 years ago and still running good.

I want to edit some things in the post like modal bevaiour, block numbering etc. How can I do that. I tried to open the existing post(*.omf) with HYPERPOST but it gives me a version error.

Is this require a additional license? How do i know that i have it in my package or not?
There are two files *.omf and *.oma what are these?

I appreciate your patience in going through my thread and any help would be appriciated.

Best Regards,

Dear Mr. Ananth Kulkarmi,

I am from OPEN MIND in Singapore and would be most willing to help you in this matter. However, I need your detail information about hyperMILL license and hardlock number in order to do it. Pls send them to "boonhuat.chia@openmind-tech.com"

Regards.

Excuse me for interrupting your topic, but we have Hypermill v9.7.
I need to edit my pp for 3x fanuc, but i don't think we have Hyperpost.
Does this come with Hypermill?

No need to apologize for your question.

hyperPOST was available in the past and is grandfathered in some cases.

Your dealer will contact you (in NL). Current OM posts, such as Fanuc 3x, are quite robust and have many configurable parameters.

Al (OM-US)

No need to apologize for your question.

hyperPOST was available in the past and is grandfathered in some cases.

Your dealer will contact you (in NL). Current OM posts, such as Fanuc 3x, are quite robust and have many configurable parameters.

Al (OM-US)


So in short term, hyperPOST comes free with Hypermill v.9.7??

Sorry for any confusion, OM does not ship hyperPOST. The previous post was certainly the odd case and he is already in contact with his local office.

It is best that you direct further questions about to your local office/dealer.