A - cylinder, steel or AL, .870 o.d. dia x 3/4" long with 1/8" center hole drilled thru.

B - cylinder, steel or AL, 1" o.d. x 3/4" long with 1/8" center hole drilled thru.

Normal machining tolerances and finish OK. B can be from standard 1" bar stock.

Quote one each (proto for approval) and 6 & 12 each.

Also need one (note - change i.d. from 1.004 to 1.000, and 1/4 shaft to 3/8) - sorry for crude sketch!

Part A 1pc. @ 12.50 6pcs @ 11.00 ea. 12pcs @ 9.99 ea.
Part B 1pc. @ 10.00 6pcs @ 9.00 ea. 12pcs. @ 8.00 ea.
Stainless part per sketch 1pc. @ 25.00 6pcs. @ 23.00 ea. 12pcs @ 21.50 ea

Thanks Brian



.

What kind of tolerances do you have on the stainless piece?

Never mind - project cancelled.