Hi All

I'm new to cnc and i am just completing a xyz table build so you might be hearing from me now and then, as I try to get this thing moving. This forum seems like the perfect place to get all the info I'll need to see my project to the end. Now before i start asking my stupid questions I'll check out the old posts.

Welcome,
I'm pretty new here as well but have found there is no end to the experience and ideas that can be found here.
:)

Welcome, what part of this great land of ours you from?
Ask away of you ask something that has been asked more then once more often then not someone will reply with a link to that thread. I have been a member for a bit and Im always amazed at the info passed around

I'm a Northern New Brunswick sign shop owner/operator who likes to dabble in electronics among a lot of other things. So i figured if I could put a CNC Router together as a hobby project it would be a nice addition to the shop floor, if I succeed. It's been a fun project so far and has brought me here quite a bit already so I figured I should probably join in the conversation. I'm powering up my steppers and getting into the final steps of this project. Can't wait to actually play with it.

Bozona1

Well the CNC will be a big help to you then. I made my start in the CNC world as a sign guy in Vancouver