I was wondering if there is anything I could add to the water in my water table to help keep the water from turning like crap so fast!

Plasma Quench is what I use. I have not had any problems so far. http://www.koalindustries.com/plasmaquench.html

Thanks totalfab06 , I new someone here would be able to help..

I put Soda Crystals in my Water Table.
It stops the water from 'going off'
I cleaned the water out of my Water Table for the first time in 2 months.
It was really nasty, very dark in colour and I removed about 5 lb of sediment from the bottom of the tank :eek:
At least the water table stopped all that nasty plasma dust from getting into the air :)
My Water Table only holds approx. 16 gallons, and I need to make a new tank with greater capacity, and it will also have a separate air/water tank :)
I did notice that after cleaning my tank, and replacing the water the smoke was noticeably less when cutting.

Andy