IM HAVING A PROBLEM WITH SPEED OF CUTTING ON MY CNC.

I USING CABINETPARTSPRO PROGRAM TO GENERATE G CODE AND MACH 3 TO RUN MY MACHINE. BUT ITS JUST TO SLOW.WHEN MACHINE STARTS TO RUN I BUST FEED RATE TO 300% AND ITS STILL TO SLOW. IM WONDERING IF THERE IS ANYONE WHO CAN HALP ME SINCE IM NEW TO ALL THIS.

THANKS

http://www.machsupport.com/forum/index.php/topic,6121.0.html

try this post in Machsupport...it may help you...basically you might need to edit your Gcode feedrate (f15 for example to f60) just for starters...higher if you machine will take it... hard to determine not knowing what machine setup you have

hope i was able to help

Bob

You should be able to set the feedrates in CabinetParts Pro somewhere.