View Full Version : Video of my machine. It will take a while to display.


ynneb
08-11-2004, 04:06 AM
This may not work in all browsers. It does work in Explorer.
Make sure your sound is not turned up too loud.
If you want to download the bigger video version that is clearer to see, you can get it from here http://www.dnd.net.au/Movie_0002.wmv (9 meg)
If your browser wont allow this video to display you can still download the small video for here http://www.dnd.net.au/Movie_0001.wmv (1 meg) You can restart the video by right clicking on it, and pressing start.
You can see the stuff I make with this machine here www.trend.com.au
You may need to scroll down a bit to see it.
<html>

<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>New Page 1</title>
<meta name="Microsoft Theme" content="cascade 001, default">
</head>
<body>
<p>
<iframe name="I1" src="http://www.dnd.net.au/y.htm" width="588" height="416" scrolling="no" border="0" frameborder="0">
Your browser does not support inline frames or is currently configured not to display inline frames.
</iframe></p>
</body>
</html>

sendkeys
08-11-2004, 07:07 AM
cool video :) what controller software are you using there? :)

ynneb
08-11-2004, 07:17 AM
I am using Mach2. The bigger video shows it clearer

Bloy2004
08-11-2004, 08:38 AM
Nice video there, Ben!

Ken_Shea
08-11-2004, 09:33 AM
Thanks Benny, very enjoyable seeing all your work in action. I thought I heard the word "Beautiful" in the background sound you must have been satisfied with the results. :D

High Seas
08-11-2004, 11:29 AM
I thought I heard the word "Beautiful" in the background sound you must have been satisfied with the results. :D

Nahhh - I bet he was talking about the helpmate that was watching the machine while he filmed!

arvidb
08-11-2004, 02:45 PM
Great video! Nice to see some timing belts in action in addition to the "router action".

Arvid

ynneb
08-11-2004, 06:07 PM
Nearly right HighSeas, He was doing the videoing, If I had done it i would have put a lot more close up shots of all the working parts. Next time I will do that.

Patrick2by4
08-11-2004, 07:11 PM
excellent video benny, I didn't realize your machine was that big. (You got to do something about all that spaghetti)

c-c-cncboy
08-11-2004, 07:38 PM
OMG Benny - noooooooooooooo! Those poor lil dolphin babies you harvest in the wild and cast in resin in your chow bowls and border tiles - *sob* - *choke* - nooooooo!
Terrence (crumpled and inconsolable)

Splint
08-12-2004, 05:01 AM
Well done Benny...
I'll have to come up and see it run some day.
Cheers
Splint