190773
03-17-2008, 01:14 PM
Wondering if anyone could help with a post file for Solidcam and Prototrak.
|
View Full Version : New Machine Build Does anyone have a Post for Solidcam and Prototrak 190773 03-17-2008, 01:14 PM Wondering if anyone could help with a post file for Solidcam and Prototrak. Piobaire 03-17-2008, 03:24 PM Hi! No, I've not but we (you) could make one... What is Prototrak code look like, is it all conversional it will be quite some work. BR /Piobaire BJ-DEKA 06-10-2008, 10:57 AM Hi, I have one that we use on prototrak plus and mx2 machines. khufnagle 09-18-2008, 10:26 AM You should be able to use a Fanuc 6 post. It will not convert to conversational but depending on the ProtoTRAK model you may be able to edit the g-code. pc_loadletter 02-25-2009, 01:19 PM Wondering if there was any update. I'm new to the forum and this thread is exactly my issue at hand. |