I would like to have a print template in version 22 like 'I was able to have w/19 -That is, a template that has the company logo on it etc. I am not able to import .cct from ver.19. (ver. 19 also had basic templates available to start with -nothing offered in v.22) Any help is appreciated. Russ

Russ,

You will have to open the print template in Version 19 and then save it as a .cad file. Once that is done you will be able to open it in Version 22 and copy and paste it to any Workspaces that you need to.

Regards

Thanks -yes that does work -almost- I pulled our company logo from our webpage and had it on the .cct print template -unfortunately the logo does not import in .cad. I also have bobart in v22 so I think I can get it in using bobart. My only concern there is that the other users in the shop do not have bobart so they will not be able to use the template- any ideas here?

Russ,

Good point. Version 22 does not support OLE like Version 18-21. I will make a suggestion to add that functionality.

Regards

That would be beneficial -thanks, Along those same lines (no pun intended) I would like to remove the axis arrow (s) that is always in the center of the screen. It can have a negative effect on the printed version of the drawing. We draw up a nice print only to have this silly arrow icon in the center! Previous version did not have this. Any advice on removing it. Thanks Russ

Yep I am NOT happy here. First I find I cannot the print template from v19 into v22 (v22 does not accept .cct templates- So I recreated a template simulating our company logo ( the v19 version allowed me capture the logo from the web.) Now that it is done I cannot print it out to full 8.5 x11 sheet because the printer picks up the ucs icon in the lower left hand corner as well as prints out the axis icon smack dab in the middle of the print. This does not look very professional when printed out as well as it can effect what you have drawn when it comes to printing it out. Did I purchase the wrong software for drawing prints? Please advise. Any help is appreciated.
Edit/Delete Message

Odd,

I thought this worked before but you could hide the UCS in the UCS manager.

Cant get it to work now. Maybe a report to Bobcad would be in order.