I have a need for a simple nut; 5/8" square 12L14 stock, 1" long, with 1/2-13 tap through. 9/16" dia x 90 degree cham on one end. No sharp edges or burrs. I've used about 500/month for the last 6 years.

Don

Don,

I will pm you a quote first thing in the morning. Thanks.

Micah J Hilditch
Sales Engineer

MANUFACTURING SOLUTIONS
440.354.8113
800.878.5648 F
mhilditch@hventure.net

hello could you give more information? what do you mean by 9/16" dia x 90 degree cham on one end, what is your tolerance?







luther's portable weld shop
owner
618-292-5927
geiger1968@yahoo.com

how many would like a quote on? 500? 6000? also deliverable when? first of each month or one lump order?

Sent PM with a quote.

Michael Crouse
mcrouse@chasecomachine.com
www.chasecomachine.com

Thanks to all who have responded;

I'm currently making these myself, they go into an assembly I sell to my customer.

Time is not a huge issue, in general I would like to get them within 3-4 weeks of an order.

Please quote them in 1000 pc quantities. Plan on shipping UPS to near Cincinnati. I think 1000 of them will weigh about 60-65 lbs.

You are to supply material. I currently pay about $0.16 each for material ($20 for a 12 ft bar).

The chamfer one one end of the threaded hole should be .530 to .590 dia. A slight breakout burr is permissable on the other end.

I have a couple of prices under $1, so that is a target.

Thanks,
Don

Hello, lakeside94,
P.M. has been sent with quote
Thanks Brian

Brian's Machine & Powdercoat
briansmachineandpowdercoat@yahoo.com
(405) 574-5910
(405) 224-7323

Don:

PM'd you a quote.

Micah J. Hilditch
V.P. of Marketing

MANUFACTURING SOLUTIONS
440.354.8113
800.878.5648
mhilditch@hventure.net

PM sent with quote, thanks,.........Bob

Is this RFQ still open?

I sent you a pm about your phone# sence you have not responded I assume you pay about the same way. Jerrel

Jerrel: You assume too much. You must do a huge business with your attitude and spelling skills.