Hello,
I am looking for a cnc knee mill. My location is in northwest Ark. It is in a home shop, so it can't be too heavy. Large is ok, but the driveway won't take real heavy loads. The machines that have caught my attention are the Bridgeport, Hurco, Tree, and Wells Index, but any other ones are ok. The operating system will be Mach 3 and Mastercam V9

Thanks,
JAckal

Hello,

I have a new Majestic RM-10x54, 3 axis CNC, frequency drive spindle, .75kw / 1HP (1,064 oz/in), 3000 RPM AC servo motors 220V that can operate on single or three phase power, 2500 CPR encoders, ground (not rolled) ball screws, Mach Motion control and computer, R8 spindle, that I am going to display in the Westec show at the end of this month. I will sell this machine for $16,500. delivered to your dock (you must unload) I can deliver it after the show.

Kirk Brown
Majestic Machinery, Inc.
www.majesticmachinery.com
626-336-2350