|
View Full Version : Wear offset and writing parameters gollame 03-02-2008, 06:50 AM Hi i have a Colchester tornado 100 with OT Control, i don't have any wear offsets and i can't put tool headings in or any writing thow the machine will accept it when i download from pc in brackets ie: (F/TURN PCLNR R=0.8) I reckon its some parameters missing and its a pain in the back side, can anyone help...? cheers gollame gridley51 05-05-2008, 07:23 PM What version of OT is it? An OT-A won`t accept comments but a B onwards will.There is a parameter to change to get the wear offsets page up but it depends on the model. Mark. shujah 10-28-2009, 01:06 AM I have the same problem. Fanuc OT series A. and its mother board no is as under. A16B-1010-0150 Master PCB my wear/offset page does not apprea. you are requested to help me. Machine is as under. Feeler FCNC-100 SERIAL T1036 DATE 04-87 MOTHER BOARD A16B-1010-0150/06A SPINDLE DRIVE A20B-1001-0120 AXIX DRIVE A16B-1200-0520/0.5A |