Arty 3000
02-26-2008, 12:24 PM
hello, i'm looking for a bench top engraver or stamping machine. so that i can put heat numbers on brass, monel, 303, etc. nothing really expensive.
|
View Full Version : help with engraving Arty 3000 02-26-2008, 12:24 PM hello, i'm looking for a bench top engraver or stamping machine. so that i can put heat numbers on brass, monel, 303, etc. nothing really expensive. philbur 02-26-2008, 02:05 PM How big are the parts that you need to engrave. what size font do you need. You will need lots of spindle rpm. Phil hello, i'm looking for a bench top engraver or stamping machine. so that i can put heat numbers on brass, monel, 303, etc. nothing really expensive. SpeedsCustom 02-26-2008, 06:08 PM If your looking for engraving only and not going too do anymore. Look into a Praxxon and Sherline. A Sherline can have a 90psi air spindle suited for 50 k rpm. -Speed |