I am looking for a person or company that can take our cad drawings and tell us what we would need to setup the process of making our parts in house. We have specific parts, about 5 or 6 to makup our assembly ,and they do not change much. We will not do much general machining, except for jigs and fixtures. We would need to know what type of milling machine and it options, also a turning center and its options. Tooling requirements, programming etc.... I can give more info as needed. I am a watchmaker and a machinist, but i work mostly with manual mills and lathes, doing micro machining with small equipment. I do not have much experience with the CNC world. I have been doing research for a while but there are alot of variables to try and rap my head around and would prefer to pay someone to help.

Thanks

Sean

Dear Sean:

I am Micah, from MANUFACTURING SOLUTIONS. I believe we can provide what you are looking for. I would love the opportunity to discuss your needs in more detail and explain how I can help you and your company achieve your goals. Please contact me at your earliest convenience.

Sincerely,

Micah J. Hilditch
Sales Engineer

MANUFACTURING SOLUTIONS
P: 440.354.8113
F: 800.878.5648
mhilditch@hventure.net

Hi Sean,
Where is your facility located?

Hi Sean,
Where is your facility located?


We are located in Pittsburgh, PA

Dear Sean:

I am Micah, from MANUFACTURING SOLUTIONS. I believe we can provide what you are looking for. I would love the opportunity to discuss your needs in more detail and explain how I can help you and your company achieve your goals. Please contact me at your earliest convenience.

Sincerely,

Micah J. Hilditch
Sales Engineer

MANUFACTURING SOLUTIONS
P: 440.354.8113
F: 800.878.5648
mhilditch@hventure.net

Thanks for the reply, I will contact you Monday or Tuesday of next week.

Sean

You can contact me if you need. This is what I do day in and out. Experienced with all types of CNC Machines and CAD/CAM Systems. 28 years experience. I am in CA. but work all over the world. Most all can be handled over the internet and phone without the expense of travel. Have a high degree of experience in small part mfg.

Applications Engineering
Paul Reicher
Temecula, CA
pareicher@hotmail.com

Sean:

I am located between Cleveland, OH and the Pennsylvania border, in Concord, OH. Please contact me if you still need a consultant. I would be glad to help.

Micah J. Hilditch
Sales Engineer

MANUFACTURING SOLUTIONS
P:440.354.8113
F:800.878.5648
mhilditch@hventure.net

Hello Sean

I just saw your thread asking someone to guide you through your journey into CNC. I have been a CNC Machinist / Engineer in Central Ohio for 20 years. In fact, I just finished with a client in which I accomplished the very same thing you need. From your post, I understand your parts won't change much. Macro Programming sounds like a great option for you. I will set-up a program that is completely user definable to your parts. Then you can easily make revisions when needed. Macro is a somewhat complicated process, but once completed, it is easily adaptable by anyone and will provide total versatilityfor your company. I would love the chance to earn your business.


Thank you
Joe
(740) 501 3533
jupdike@cyclestartcnc.com

Thank you to all who have replied. I am traveling at the moment, I will however be back in my office on Tuesday. I will be contacting several of you to determine who is the best fit for our company and budget. I am sure with the wealth of information that you guys can provide, we will no doubt be able to find a solution to our project.

Thanks Again

Sean