hi every i finally got a part all the way through the cad cam post procceser cycle .i thought it would never happen but even a old dog can learn new tricks.i have one problem left to overcome chad sent me a new postprocessor and it worked for everything but one on the final pass it dosent complete it stops short about two inches and with draws leaving a unfinished part .it should go to the start point and finish the pass .for now ill just re post it and make anouther cut. my little buddy chad will get it fixed up for me.well it has been a journey and it has been frustrating but here we are.tanks to rodney and chad for hanging in there and getting it done .

Hi Woffler,
I'm glad to hear things are finally going in a better direction with your Dolphin Partmaster and the machining! I'm sure Chad and Rodney will be there to help when needed, and we seem to be getting helpful responses from other Dolphin users too.
Keep us posted with your results.
Best regards,

Glad to hear everything is running better now. Let us know if we can be any more assistance. Talk soon, thanks.