|
View Full Version : Fadal 32MP Control bigcrunch 02-13-2008, 10:29 AM Hi, I have been shopping for a CNC machine, probably Fadal 4020. Most have Fadal 32MP Control are they good, bad, easy to use,,, ??? thanks, Tom DareBee 02-13-2008, 12:31 PM They are proven and reliable. IMO not as fast as they should be, and look ahead is poor. You will find a lot of places running the 88HS control, the 32MP is a computer networked to the 88HS in 1 panel. bigcrunch 02-13-2008, 01:46 PM Is 5000 spindle hours high for a Fadal 4020? Probably a vague question being a used machine, but hey any input I can get I would appreciate in making the right decision. thanks, Tom bigcrunch 02-13-2008, 01:47 PM Is 5000 spindle hours high for a 2000 Fadal 4020? Probably a vague question being a used machine, but hey any input I can get I would appreciate in making the right decision. thanks, Tom |