View Full Version : Manual Pulse Generator for K2CNC


Mike Stevenson
02-12-2008, 12:02 PM
Anyone here familar with or know anything about CNC4PC's Manual Pulse Generator seen here:

http://www.cnc4pc.com/Store/osc/product_info.php?cPath=40&products_id=158

It's supposed to work with MACH3 through a 2nd LPT port. I know I need an MPG bad because moving the machine around with the keyboard or mouse just doesn't cut it anymore (TOO SLOW!)

ger21
02-12-2008, 01:41 PM
You could get a Shuttle Pro on Ebay for about $75. Lot's of people using them with Mach3.
http://www.contourdesign.com/shuttlepro/

Mike Stevenson
02-12-2008, 08:57 PM
Thanks for the info Gerry. I appreciate the tip very much. But being used to the full sized, 100 click per rev dials on the big machines I think this is the best alternative. I definately like a dial better than arrow keys. I just wish I knew if the thing really works. The company is in the UK but after talking to them on the phone today I guess I am going to go for it. I will report back here and let you guys know the results.

tassie
08-24-2008, 08:26 PM
I'm a few months too late, Mike, but I think the sort of thing you're looking for is available from Romaxx who make mini CNC routers. http://www.romaxxcnc.com/products.htm#mpginstalled

Regards
Philip

jalessi
08-24-2008, 11:01 PM
Mike,

This will save you a few dollars plus free shipping.


http://tinyurl.com/4ecoxo

Jeff...

msg
04-11-2009, 12:55 PM
Hey Mike, Did you ever get yours set up and running? It's been awhile.

MSG

Suleman Khosa
09-03-2009, 04:23 PM
Dear sir,

How r u?

I got your email id from one website. I have one problem in my machine regarding that i need ur help.


Machine Name: Multi spindle drilling machine
Fanuc Control : 6M
Maker of machine: Sakazaki
Model of Machine: SM-NC94
Manual Pulse generator Part Number: A860-0201-T001


Machine all functions are working properly. But its manual pulse generator is not working in handle mode.

I checked the manual pulse generator, its OK and working properly at other machine.

I think, there is any parameter in FANUC control 6M which enable or disable manual pulse generator?


I have manual of machine but its in japanese version. Manual number is B-52265/01 please give me if u have.


In old control you have any idea of parameters? or there is any other solution for that cause.


Can you help me in that matter?

My email is is subhani_engr1@yahoo.com.



Thanks



Hope you will give me positive response.


Suleman Khosa
Electronics Engineer