JUST INSTALLED LATEST UPDATE (BUILD 861) AND NOW THE VERIFY WITHIN BCAD QUIT WORKING. ANY IDEAS?
THANKS

It may have been one of several things, so I am going to give you multiple options, starting with the easiest first and most deytailed last:

1) In the case that it just an OCX registration issue:
Open the NC Verify folder under your BobCAD-CAM V22 (C:\Program Files\BobCAD-CAM\BobCAD-CAM V22\NC Verify\)
Then double click on the reg_ocx.bat file (This will open a command window and registers the needed files for the system), click OK through the four dialogs that appear in the foreground.

2) In the case that the license option got modified:
Open the Predator Virtual CNC 7.0 folder (C:\Program Files\Predator Software\Virtual CNC 7.0\)
In here you will find a file called VirtualLicensingMgr.exe, double click on this file to open a dialog.
In the Select License field select Predator Virtual CNC for BobCAD and then click OK.

3) In the case that neither of the above work:
Uninstall the Predator Virtual CNC system from your computer.
Open the System Files folder under BobCAD V22 (C:\Program Files\BobCAD-CAM\BobCAD-CAM V22\System Files\)
Locate and double click on the Predator Virtual CNC for BobCAD.msi file. This will install a fresh instance of Predator on your computer. If you can not find the msi file, you can download it from the BobCAD site: http://s229444871.onlinehome.us/bobcadsupport/posts/BobCAD_2007_Mill_Posts/PREDATOR/System%20Files/Predator%20Virtual%20CNC%202005%20for%20BobCAD.msi


Hope this helps.

Regards

system folder and contents was missing
thanks

Did that help fix the issue?

Regards

yes, the verify works now.
thanks for your help

Good! Glad I could help.

Regards

I was having the very same problem with verify. I found this post and now my verify is working just fine.

Thank you guys :)