Hello All,
I am making plans for a splindle motor upgrade to my "Mutt" Mill.
Here are the components to be joined in a TBD way:
Spindle:
http://www.sherlineipd.com/indpics/6520picl.jpg
New Motor:
http://www.surpluscenter.com/images/p10-1783-AC.jpg

The physical mounting of the motor should be a piece of cake, the thing I am looking for advice on is what pulley combo to use.

I was thinking about these from taig:
http://www.super-tech.com/root/taig/pix/tg1161.jpg

If anyone has any thoughts or suggestions, please let me know.
I would be interested to see if anyone has used a similar combinationand ran into any issues while doing so; i.e. pulley center hole diameter, etc...

I am currently using an old Spectralight spindle motor with a router speed control, and that combination is basically weak and LOUD (sounds like a 747 taking off).

Thanks in advance,
Mike