View Full Version : mori-seiki TL1 Fanuc 6T parameters


shvavim
01-16-2008, 04:29 PM
i need a manual with the parameters for my mori-seki TL1 fanuc 6T
the params was errased 1 month ago
please help mi

SGARCIAM
02-20-2009, 12:13 PM
Did you locate your parameters ? What type of spindle drive do you have ?

ian.england
08-03-2009, 10:44 AM
I am also looking for manuals for a mori Seiki TL1 twin turret machine with Fanuc 6T controls.

Ours doesnīt finsih booting up. Display shows Error 901 (turret 1).

Donīt know if this is a Mori Seiki error code or Fanuc error code.

According to the Fanuc error codes, 900..... are related to Bubble memory problems.

Anybody got any ideas ? ? ?

Best Regards

Ian England.

mty_cnc
08-03-2009, 12:41 PM
Ian,
Your Bubble Memory could be dead. I recommend you using a Bubble Memory replacement made by Memex in Canada. They have a way to automatically download all parameters from your original board. I'm not sure if this would work when you already have a System Error such as Alarm 901.
It seems you are located in Argentina, you can find more information in spanish in the following link:
http://www.cncsoluciones.com/Ampliacion6.htm

ian.england
08-03-2009, 01:48 PM
Thanks for the link.

I will give them a call to see if they can help.

Meanwhile I would still like to track down a full set of manuals for this machine, as it was bought second hand and arrived without ANY documentation whatsoever ! ! !

Best Regards


Ian England