hi, i was wondering if someone might be able to help me. i have a tree journeyman 250 mill with Acramatic A2100 software. does anyone have a copy of this software on disk? any help would be greatly appreciated.

there nothing is wrong with the software on the mill or the mill itself. i am physically disabled (paralyzed) and cannot use the controls on the machine. i want to install the program on my laptop and use the software from the laptop. I already did it with a cnc lathe with anilam controls and it worked good. if i can't do it with this mill i wont be able to use it. i am looking for the software on disk or file. thanks

we have the a2100 on a republic-lagun ,the only way for us to get an other install would be to buy a new hard drive , big dollars!

what's the problem with the install you have now?

nothing is wrong with the software on the mill. i am physically disabled (paralyzed) and cannot use the controls on the machine. i want to install the program on my laptop and use the software from the laptop. I already did it with a cnc lathe with anilam controls and it worked good. if i can't do it with this mill i wont be able to use it. i am looking for the software on disk or file. thanks

you can connect a keyboard and mouse to your controller

and a separate screen if you have on board video on the mother board

just pull out the video card for the console (you will lose touch screen if you have it)


i'll check to see if you can run that control remotely from another pc

There is no desktop simulator software for the 2100 to the best of my knowledge. If the machine was originally equipped withthe IS (interactive support) option you can connect using the connection / telephone port on the side of the machine.

Could also connect a different monitor / keyboard / mouse to the standard ports supplied on the main control unit

Bob