Can someone assist. I need a postprossesor for Mastecam 9.1 to Mach2. Is this available. Please let me know.
Thanks to CNCZONE for a stunning cnc site.

If you post a sample of your code someone may be able to help you
edit your post.

PEACE:D

I am a newbi. I thought its one post for all your code to work on Mach2.Just like a interpreter. If you can explain what you mean by a sample I will try.

Mach2, is this a amchine or a control. I have not heard of this.

What Hardmill is talking about is the gcode tat is sent to the control of the machine.

Mach2 is a control program made by www.artofcnc.com

I Keep forgetting that alot of you just have home made cnc's .I am used to the big cncs up to 5axis machining.

Thanks for the link.

I've had lots of success with the generic 3 axis MPMillPwr post (attached)

There are no G28 codes to send your machine screaming to a machine 0,0,0, hitting all sorts of expensive fixtures along the way :)