Hi again,
Still no luck with getting my machine working, it has been just about 4 months now.Nobody in Christchurch NZ seems to know how to fix it.
I have been to a place that sells cnc routers,they did not know,i have phoned industrial electricians,but they say not my field.
If i plug the X and Y axis cables in the Z plug and press the Z jog button,the X and Y work,but if i plug them in their own plugs and press the jog buttons nothing happens.I thank the members of the forum for the previous help
Mike

Thanks Shannon,this young fella got the machine going after about 10 mins looking at it.
The problem was a loose wire in one of the control units.
Thanks Mate
Mike