I am looking for some suppliers for plastic material. I am not sure what type I need, but I am thinking it is polyethylene. I will be routing and reverse engraving this plastic material, so I am thinking it will need some type of acrylic cap, various color selection preferably.

Well I am off to search, but thought I would ask here first, for any suggestions, or known suppliers that you all have experience with.

Thanks in advance for the responses.

Here are some suppliers you could check out:

http://www.professionalplastics.com

Delvies Plastics

US Plastics Corp

I've ordered products from the last one but don't have any experience with the other two. Hope this helps.

Dennis

Here's another one to look at

http://www.artisan-es.com/index.html

http://www.gravograph.com/usa/index.php

Scott

In California try http://www.ocip.com

Depending upon what you are actually doing -- go down to your local hardware store, Home Depot, Lowes, etc and buy yourself some plexiglass sheet goods and Krylon paint. Not likely will you find a polyethylene with an acrylic cap.
Jim