Hi, Im working on a RF45 clone millling machine cnc conversion and might need someone with a mill to do some minor trimming or surfacing on a ballnut mount or bearing mount. The deal is I am designing the parts and making them with my mill but when it comes time to disassemble the mill and install the cnc parts- if they dont fit exactly I hope to not have to put the mill back together to trim a part .020 and start over. Especially the Z axis column. That leadscrew is kind of a pain to put back in. I have done it and hope to only pull it out once more and go back in with the ballscrew assy. Also on my Y slide there is a spot about 2 inches square on the bottom that I need to surface flat for the ballnut mount and cant mill it myself. Its a chicken and egg problem :) I need 2 mills. Please let me know, I will pay you for your time, should be very easy. Thanks Dave