Can anyone confirm the use of the following indicators found on the 'mathematical funtions' page of the Philips 432 controller, used on a Maho MH series CNC milling machine.

'
''
>
<
e
rad
and an 'upward pointing arrow'

In addition does anyone know an easy way of understanding how to use

K1=

in relation to connecting circles or arcs when used with G64 geometrics.

Thanks.

Dear sir,
i want machine constants for maho 800, iam waiting ur help
thank you

51074

Maho MH 800 E2
Please note the machine I copied these from had the automatic tool changer removed and disabled. I have checked our other machines and they all seem to be slightly different to each other, ie different constant numbers and different values, I think this is due to their old age and the maintenance engineers attempts to keep them going. Don't treat these as hard and fast constants, you may need adjust as you go. One thing I do suggest you alter is the rapid speed, our machines have been set to their upper limit, if your machines have not been run for a while it would be better to ease them in first.
Best of luck
Ray

Now that's dealt with, has anyone got an answer to my original question?