We just had a Deckel DC70 removed from our facility and I still have the manuals here. If anyone has a need for these manuals or would like additional info concerning what literature I have available let me know. If you can use them all I ask is that you provide shipping/handling and I will be more than glad to send them to you.

Hi,

I might be interested in those manuals, is DC70 similar to DC40?
I am interested in the sequence for loading the parameters for NC and PLC, for
a Deckel DC40, with Siemens M8.
Your help would be appreciated,

Best Regards,
ddanutz

I'm not sure of the similarities of the DC 70 vs. DC 40. This was an old machine that has not been in operation for quite some time so I didnt have an opportunity to do much operational or programming studies on it. I will attempt to cross reference these 2 machines to find out if they are indeed compatible. As far as loading parameters I will also try to pinpoint any machine specific techniques and/or procedures that I may know of to assist you.

Best regards,

Johnny Outlaw
Millwright

Hi Johnny,

Thanks for your quick reply.
Yes, these are very old machines, DC40 is a double pallet machine.
I've heard that it has special sequence to call the parameters up from non-volatile memory inside, but i am not able to find such information! I would appreciate any help here,

Thank you,
ddanutz