Hi

Quick question do you guys power your router separately or do you power it off your psu that gives the steppers their power

Separately.

A "router" needs 110 to 220v (depending on country).
A "spindle" usually needs a Variable Frequency Drive and maybe 220 to 380v.
Your stepper drivers (lets say Geckos) usually need 30 to 80v depending on the motors.

Quick question do you guys power your router separately or do you power it off your psu that gives the steppers their power

I'll answer the question that I think you're asking. :)

I have one mains supply (240v) coming into the box containing all the electronics.

Including a SSR which switches the router. Have no problems with this setup.

So the answer in yes.

Greg

Thanls GREOLT - that clarifies it for me , just need to work out how to do it with my electronics.