NoLimit
12-02-2007, 09:12 PM
Contemplating on buying this. Anyone own one to tell me how they like theirs?
:)
:)
|
View Full Version : Torchmate 4? Anybody have one? NoLimit 12-02-2007, 09:12 PM Contemplating on buying this. Anyone own one to tell me how they like theirs? :) Mike@Torchmate 12-03-2007, 11:52 AM What are you looking for in the table if I may ask? I can give you some personal opinions on what I'd recommend to you. NoLimit 12-04-2007, 07:16 PM Heavy Duty User Friendly basically... Mike@Torchmate 12-05-2007, 10:58 AM Heavy Duty User Friendly basically... Turnkey, the table can come with training, a high end servo system, heavy duty gantry, either an adjustable water table or down draft system. You can choose plasma, oxy-acetylene, both, or an air scribe as well. Also what we would recommend you get this table with the Thermal Dynamics Autocut 200 series for full production plasma cutting from 1/2" to 1" at a rapid rate of travel, no pre-heat, and only 3-5 degrees of bevel. Coupled with the servo motors, the pair truly go together. |