HELLO EVERY BODY I AM ASIF(FISA) I KNOW THAT THIS IS A RIGHT PLACE TO SHAREING OUR THECNICAL PROBLEM AND I BELEIVE THAT EVERY DAY THERE ARE LOT OF PROBLEMS SOLVEED HERE THANKS ADMINISTATOR FOR GINING US A RIGHT PLACE.
NOW COME TO THE MY PROBLEM.MY PROBLEM IS I AMA NEW COMER IN SPIN FORMING AND WANT TO MAKE THIS PART(see jpeg) through spining process.i am trying to makke this part from last 10 days but still unsucessful.i dont know where i am wrong i see different videos on internet for ideas to make this part and adopt lot of things for those videos but result is zero.i am attaching the jpegs of my job set up and also part specification and tool path which i was generated on mastercam lathe for machining path.this is the request for all the technical persons that plz help me i realy need some one advice for solving this problem because now my colleague doing jokes on me about this part.i am also posting a jpeg of my tool path wana know that is it right tool path for this part. plz help

Fisa,
1-What is the component made of, have you checked the specs for ductility?
2-Have you tried more than 3 tool passes, maybe you are giving too much stress to the part??

Best regards

Bruno

I'm just a little experienced, but right tool path for spinning not a straight line. It must be something like in this picture:
http://leifeldms.com/leico/en/images/technologien/prinzipbild_drueckenjpg.jpg