Here is a series of how-to videos I am working on. The project is to make a stomp pad using CNC. The tutorials go through Intro, Design, CAD, CAM and Control in Mach 3. There is a little G-Code as well.


Here is the link:
CNC Video 1


Here is the link:
CNC Video 2


Here is the link:
CNC Video 3


Here is the link:
CNC Video 4


Here is the link:
CNC Video 5

I would love some feedback if you get a chance.

Thanks,
Ivan Irons
http://www.cncinformation.com

Ivan - great set of video's! Can't wait to see the part cut.

I commend you on the quality of audio & video; you're very well-spoken.

What screen-recording software are you using?

Thanks tikka308,

I use a combination of Camtasia and Vegas Video to shoot with. I have added a few other videos so far and you can see the cuts here:
http://www.cncinformation.com/CNCBlog/

Then click on the link on the left----------->>>>

I am not finished editing the video, but I am done with the project. Yes.


I also went over to your blog and saw some good things there. I will have look it over a bit more this weekend.

Ivan Irons
http://www.cncinformation.com

Hello All,

The CNC Stomp Pad Tutorial Series is finished. You can check out the entire set of videos here:
http://www.cncinformation.com/CNCBlog/

Then click on the link on the left----------->>>>

I am interested in feedback if you get a chance.

Thanks,
Ivan Irons
http://www.cncinformation.com/

Great job Ivan. I hope you produce some more videos.

Thanks

Tim

Great site you got there Ivan, really very informative for a n00b like me :)
I'll watch the videos later today, for now I've signed up for your 7-day course

Well done, thanks for sharing