Good afternoon everyone!

Just wanted to point everyone to a few pages they may not be aware of from PTC.

They have put together a few nice resource sites for NC, Vericut and Mold Design.

You must be a customer (existing) to get access to the pages:

Pro/NC Central:

http://www.ptc.com/cs/cs_24/howto/gim7903/gim7903.htm

Vericut Central:

http://www.ptc.com/cs/cs_24/howto/evs8023/evs8023.htm

GPost Central:

http://www.ptc.com/cs/cs_24/howto/ncgp4903/ncgp4903.htm

Mold Central:

http://www.ptc.com/cs/cs_24/howto/mld7323/mld7323.htm

and Expert Moldbase Extension (EMX) Central:

http://www.ptc.com/cs/cs_24/howto/mld7343/mld7343.htm

and also there are some files to be downloaded from their Technical Committee site as well:

http://www.ptcuser.org//tc/na/manuf/downloads.html

Enjoy!