|
View Full Version : Needed Manual for Deckel Maho 63V vijayraghav22 11-23-2007, 06:40 AM Hi all, Can anybody help me by providing a manual of the machine - DMC 63V. Or at least I need some documents that guides me in operating this CNC machine. Thanks in Advance, Vijay dinesh 11-29-2007, 08:26 AM I have some manual for this machine,But this is in hard copy.If your are any thing to know specific i can help you. sonnybiker 03-16-2008, 03:10 AM Hi all, Can anybody help me by providing a manual of the machine - DMC 63V. Or at least I need some documents that guides me in operating this CNC machine. Thanks in Advance, Vijay i have manual for DMC63V with siemens control (840D) both hard copy and soft copy...but the internet is so slow here... maybe i can provie it with shipping... u can contact me at +622168585967 or +62267431701 or +62267431700 regards NicolasPaul 05-07-2008, 05:32 PM I have some electronic copy I can send by email, just give me your email address if you want it... dinesh 05-08-2008, 07:57 AM Hi, If you don"t mind,Will you send the manual to hegde_dinesh@hotmail.com samtc 08-22-2008, 03:34 PM Hi, Can you guys send me a copy of the manual too, thank you. Samtc@shaw.ca shimi 10-15-2008, 01:13 AM Can you send manual to me too shimi.rashid@yahoo.com vojko 12-15-2008, 08:51 AM Hello all, I also need a manual of the machine Deckel Maho - DMC 63V, someone has him? Thanks boys. avojko@gmail.com thamiros 06-03-2009, 08:46 AM would appriciate if you could send me the manual for it aswell sith.poet@gmail.com thanks in advance remzy68 07-08-2009, 12:11 AM Hi Guys, Can anyone help me with my problem on our DMC 63V Deckel Maho Machine w/ Heidenhein Controls. Below are the details: The original motor of the machine w/ part# 1FK6063-6AF71-1AH0 became defective. We replaced it with 1FK7063-5AF71-1AH0. The only difference of the 2 motors is the # of poles. The 1FK6063 has 6 poles while the 1FK7063 had 5 poles. After installing the new motor 1FK7063-5AF71-1AH0, the machine displayed below errors. 1. C3B0 Motor Does Not Rotate 2. 0380 Motor Z Not Controllable Guys, if any of you have encountered this error or have any idea on how to fix this pls help me. Also, if you have a soft copy of this manual DMC63V w/ Heidenhein Control pls send it in my email. Here are my email address. microport.admin@gmail.com or remzy68@yahoo.com. Your help is really appreaciated! Thanks and regards, remzy |