I'm new, I mean really new to CNC and Machining...
Anyways I bought a Taig CNC Mill with a "custom controller"
I've got the system mostly setup, but I'm not sure if the leads from the control cad to the X, Y, and Z servos are connected correctly...

I'm looking around for documentation on the card and cannot find any identifying marks or labels...

Here are a few pictures of the card and servo...

http://www.hallotnorthern.com/Pics/CNC/100_2060.JPG

http://www.hallotnorthern.com/Pics/CNC/100_2061.JPG

http://www.hallotnorthern.com/Pics/CNC/100_2063.JPG

http://www.hallotnorthern.com/Pics/CNC/100_2069.JPG


Thanks...

looks like a hobby cnc board steppers not servo

thanks for the response... I did get the card specs.... and her figured out...