My Dear Freinds
I am sharing with you one clipart a day.. If u wana put ur vector art then pls place a image tooo... this will enhance the ability of selection,viewing and downloading to the needy ones..
Best Regards
KFK

NOTE: IF some body carve these cliparts then please put a picture here...:withstupi

Here is the first clipart of SUNFLOWR in EPS format...
Guys V-carve it on Cabinet.. and then post a picture of your work...
Any comments will b appreciated.:rainfro:

Nice efort. Sure you will get a good feed back.
Regards:)

Here u get :-)

Hello Kalid,

The guys involved in yohudi's free resource 3d thread should be involved in this. I think this is a great idea.

Mike

Hey, those are nice!

I'm wondering, do you have any Arabic Caligraphy? I just discovered this art form in the last couple of weeks while looking for a persian tile pattern (gift for an Iranian friend). I have to say I was floored by how beautiful many of the pieces I saw were.

Places like www.arabiccalligraphy.com and http://artsedge.kennedy-center.org/pakistan/arts-of-pakistan/calligraphy.htm have examples of jaw dropping writing.

I can't help but think some of these VCarved in wood would be spectacular.

Yes I will try today some Arabic Caligraphic art to put here...

Here u get

Khalid - so cool to have some neat clip art to work with - the Arabic is a great addition! I was hoping you'd provide some. Wonder if you could also give a background - or translation on less obvious clips- don't want to offend my "older neighbors" if I post something on the door - only to find out its an "unwelcome-sign."

Best I could find on Kalma was a wiki said:

Finnish goddess of death and decay.
She lives in Tuonela, the Finnish Underworld, and is accompanied by Surma.
Her name means "The Stench of Corpses".

Probably lost something in translation - eh?

Keep up the great work and :cheers: Jim

kalma... mEANING in islam IS:

There is no God except Allah and Muhammad (PBUH) is his prophet. This is the Kalma by reading with heart means embracing Islam..

No offence to anyone....
KFK

Somebody their to carve the clipart and put the images here:-)

Khalid - I was not suggesting any offense and thanks for the translation. Its so ironic the difference in cultural use of the same names.
You set it right - thanks!
Jim
Sorry no image of carving from me until I get back to the machine!

Hi,

I have some interest in arabic alligraphy.. so if someone is ineterrested.. I can do arabic version of their name in a couple of styles of their choice.. my preferred is KUFIC script.. will post some examples tonight...

Hi everyone

Therse is a GREAT program that will enable almost anyone to generate great Arabic & Farsi (persian) art pieces

Its name is KELK

Just go and search for it on the net

There is a gallery I think in heir homepage where can download sample works and cut them after cofirting them to DXF

It will export EMF files (Enhanced MetaFiles)

I will try to post some of the items I used from this program

I think its prices is around $ 150

Believe me this program is just amazing/beautiful/wonderfull and CHEAP !!!!!

Go and see for yourself

The link for KELK is

http://www.sinasoft.net/?tag=/kelk

I haven't checked yours yet but I did a trace of a lowres bitmap of a piece I really like and played around a bit. This is what I got. (No idea what it says)

Edit: Its a VCarve Pro Preview in case anyone asks.

Rhodon; gr8 job.can u share this with us?
I will send some more today:-)

Rhodon .. u like arabic art? How much? What the thing u like in it?

It means.. All that happens comes from Allah

Rhodon .. u like arabic art? How much? What the thing u like in it?

Don't know that I like Arabic art in general as I'm not really familiar much of it. I do know that the calligraphy is amazing though. I think what I really like about it is how words are the art. I dabbled with calligraphy in my younger days but nothing in english I ever saw came close to this stuff.

As far as sharing goes, I don't know what it is you want me to share. The piece came from the first website I linked and I just right-clicked ->save picture as. The original is much better of course, I only traced in VCarve and it came out a lot less crisp than even the low res bitmap.

Any comments on attached one

here is one more

Gr8 , Beautiful Emmkay;
could u pls send us it in Vector Format:-)

EMMKAY; ur's contribution of clipart is highly welcomed... Doors are open to everyone... Put ur images/clipart here.. this will remain here ( upto 100 of years) until the site closed / or removal of thread by the moderator or site owner.. pls dont put copyrighted clipart without sole permission of distributor....
High Seas i will be happy to see carving done by ur machine... I hope u will put some carving images here..

Regards
KFk

Repeat it and make design(nuts)

Could some body add grapes :-)

Any Comments

N that was my last post... Now i will start when somebody post image of work carried out on CNC
Best Regards
KFK

hi i m back

another gr8 carving in Vcarvepro

hmmm...:) my mirror frame just going to complete. part is 620mm x 74mmx 10mm. it took 30minutes at 100IPM with 12.7mm 90degree V-bit. program it on Vcarve pro and interface with Mach3.

Hi Khalid,

Your mirror design looks terrific!

Glad to see the software is working well for you and looking forward to seeing the completed project.

Tony

Thank you Tony Mac:) Without your great software, I am nothing:) Your software VCARVE PRO made me a skilled carver:) This program gave me 100 years of experience of a skill craftsman:)
I am looking to buy your CUT3D program too:) I really like it ease of use and functionality:)
Thank you Tony again for ur positive comments:)
Best Regards
KFK

Hi Khalid,

Excellent mirror carving. Are you allowed to post the eps file or VCarve Pro file? I would like to take a crack at it.

Jason

Dear Jason, the .crv file is of 4.28MB. If u have Vcarve pro then i am posting the WMF file for your use. If u made any design then please post here:):rainfro:

Khalid,

Thanks for the file. When I asked for the eps file I was really referring to is this picture in post #30 as I assumed this frame was part of a mirror.


Jason