DANTAMPA
10-31-2007, 04:16 PM
I live in tampa,I have 1 patented product and 1 patent pending product.I have a chance to get a dyna myte dm 4800,Machining center,but dont have a plact to put it.I was wondering id there is any one with some room,and that could help with some products of mine,share in the profits of coures.
Or let me put the machine there and they could use it too.I dont need to use it much,as demand for the product increeses,I could rent a shop again.
I was making a product with a 1948 warner swayse turret late,manuall milling machine etc.I put some live tooling on the warner and swayse,belive it or not. anyway,1 product can be seen at www.thewallfish.com.Profit margin is $125.00 a kit easy,times that by 1000= 125,000. I have many on the waiting list,I sold a bunch and had zero complaints,check out the site.You could help me and we could make some serios cash.
The overhead and the old machines were just to much.I had to dump the junk.The other product is a locking oil plug/dipstick,goes in the oil bag on harleys mostly,but other bikes as well.When I first thought of it,I laughed, ,but then I got to thinking...
Helmet locks,locking gas caps,locks that fit in the disc brake,but I got the locking oil plug patent pending through the us patent office,It also will go on heavey equipment hydralic resiviors.I'm in construction,and it getting real slow.I need to get the product rolling asap.If there is some one out there with a cnc lathe,could turn some oil plugs out,and they could use my DM4800 at there location.Or do the maching on the DM.It is large,I think 28 station,x 32,y 20 z 20.It is 3 phase,220 reg with a static converter would work,.I'm more interested in the Locking oil plug because I can assemble at home.Then start on the wallfish later.I also need 2 injection mold made.1 for the "drywall protector plate " as seen at the wallfish.com,A product to be sold seperately,and the rubber piece for the locking oil plug.I have drawings.
Call me any time,Dan 813-412-4389
Or let me put the machine there and they could use it too.I dont need to use it much,as demand for the product increeses,I could rent a shop again.
I was making a product with a 1948 warner swayse turret late,manuall milling machine etc.I put some live tooling on the warner and swayse,belive it or not. anyway,1 product can be seen at www.thewallfish.com.Profit margin is $125.00 a kit easy,times that by 1000= 125,000. I have many on the waiting list,I sold a bunch and had zero complaints,check out the site.You could help me and we could make some serios cash.
The overhead and the old machines were just to much.I had to dump the junk.The other product is a locking oil plug/dipstick,goes in the oil bag on harleys mostly,but other bikes as well.When I first thought of it,I laughed, ,but then I got to thinking...
Helmet locks,locking gas caps,locks that fit in the disc brake,but I got the locking oil plug patent pending through the us patent office,It also will go on heavey equipment hydralic resiviors.I'm in construction,and it getting real slow.I need to get the product rolling asap.If there is some one out there with a cnc lathe,could turn some oil plugs out,and they could use my DM4800 at there location.Or do the maching on the DM.It is large,I think 28 station,x 32,y 20 z 20.It is 3 phase,220 reg with a static converter would work,.I'm more interested in the Locking oil plug because I can assemble at home.Then start on the wallfish later.I also need 2 injection mold made.1 for the "drywall protector plate " as seen at the wallfish.com,A product to be sold seperately,and the rubber piece for the locking oil plug.I have drawings.
Call me any time,Dan 813-412-4389