PDA

View Full Version : Bearing design



rcrabb
04-26-2003, 11:48 AM
Has anyone tried this type of setup. It seems to be cheap and simple. http://www.rudijanke.de/Home/Projekte/CNC-Frase/CNC-Frase_Mechanik/hauptteil_cnc-frase_mechanik.html

kong
04-26-2003, 12:06 PM
I must admit it's looks solid, but surely the bends would need to be acuarate. I'm going to use this system (http://www.torchmate.com/xaxisrollers.jpg), when I build my machine ......next week! Easy bearing top, bottom, and each side.

rcrabb
04-26-2003, 12:06 PM
If anyone wants to try that design I'm willing to supply the bent plates. I only ask for pictures and feedback. I would try it myself but with summer coming up I won't have the time. I'm a metal fabricator by trade so cutting and bending the plates is no big deal.