looking for some 80/20 or there extrusion inspration, i had a few booked but
lost them after my drive crashed... I m looking for 4x4 and 4x8 table and cnc
designs... looking for somegood links etc

I do not yet have put up a project log here on the zone,
but even if you do not read swedish you can look at the
pictures of my aluminium build in progress:
http://elektronikforumet.com/forum/viewtopic.php?t=15050

Sort of like this ? :)

http://www.cnczone.com/forums/forumdisplay.php?f=228