Hi all, Does anyone know if it is possible to set a home position for Mach3 Turn. My other cnc lathe is a Pro-Light 3000, (American machine) which when i turn it on and start the software click the home button and both axis goto this position and every time. I think there is some limit switches in under the way covers which may have somthing to do with it. When using Mach3, if i reference tool 1 on the face of the work piece and set Z zero, the home position alters.... Any ideas?

Thanks...

Chapter 6.2.8 "Using3Turn". Download the document from http://www.artsoftcontrols.com/documentation/Using3Turn.pdf

Cheers! :)