Well, here goes try #2. I did check the title block and I can read the info this time. (I should have learned to proof read drawings by now.)

Need to quotes. one for 14 drag links and 56 bushings. And a second quote for 24 drag links and 96 bushings. (I will be choosing one or the other quote, not both.) I would like to have parts with in one month of turn on.

Thanks for all who looked the first time and have been patient while I got new prints up.

Thanks.

Tom.

I don't know about the Drag links but you might check out a screw machine ship for the bushings. At my work we get some sleeves simular to your bushings at a decent price but its more in the thousands of pieces instead of less than a hundred.

Carl

Anyone?

Tom,
I am working on it but it would have saved (might still) a great deal of time not having to re-create the drawing if you had the actual CAD files to upload.

Ken

Ken,

I think you are right, but I do have some reversations about putting them out there. I also noticed on the drawings, that the hidden lines in the front view on page two, did not show up. Hence no one knows how deep to make the pockets (yes, there is a mirror image one on the bottom side :). The pockets are milled out so that a .250 web is left which is in the same plane as the drilled holes for the bushings.

tom.

model