xcranker
10-25-2007, 06:31 PM
Does anyone know a manufacurer of base plates? Steel or cast iron, approx 8" x 15" with two "t" slots 80mm apart. I was looking for something off the shelf, I may need to make my own. THANKS
|
View Full Version : Base plates xcranker 10-25-2007, 06:31 PM Does anyone know a manufacurer of base plates? Steel or cast iron, approx 8" x 15" with two "t" slots 80mm apart. I was looking for something off the shelf, I may need to make my own. THANKS Les A W Harris 10-29-2007, 10:44 PM xcranker, Carr-Lane, no Tee slots, http://www.carrlane.com/Catalog/index.cfm/27825071F0B221118070C1C513E111D081B0006280B1713050245221E0107070F1A3C3B285356455C Cheers, Les H. Verfur 10-30-2007, 07:43 AM AMflex |