Maggy
10-21-2007, 03:17 PM
It's been quite some time since I used IGF on Okumas. What I'm having trouble with is going from a straight cut to a radius or angle that leads to a radius or angle. It seems I get an error message all the time. Help!
|
View Full Version : Okuma IGF Programing Maggy 10-21-2007, 03:17 PM It's been quite some time since I used IGF on Okumas. What I'm having trouble with is going from a straight cut to a radius or angle that leads to a radius or angle. It seems I get an error message all the time. Help! Jarwalcot 10-21-2007, 05:07 PM Leave the "Z" end point empty... Good luck, ramiro702 12-20-2007, 05:09 PM hola! soy de argentina, estoy buscando el software igf del okuma osp 5020l solo para poder instalarlo en mi computadora y sacarle mas provecho del q le saco en mi trabajo ya q estoy aprendiendo, desde ya agradecido con cualquier ayuda... Jarwalcot 12-24-2007, 10:45 PM I'm working off memory here... Try not inputting an end point. IGF will calculate that for you as long as you have the radius called out. If it doesn't, check your IGF parameter's. Let us know how things turn out. |