calaban
10-13-2007, 03:53 PM
Hi!
I have an Chevalier lathe fitted with Fagor 800T controller.
Can anyone advise what software i need on a PC so that i can upload PLC program to the PLC in this controller, and how i can do it that, please ?
Alarm 064, "No program" in PLC.
I have an Chevalier lathe fitted with Fagor 800T controller.
Can anyone advise what software i need on a PC so that i can upload PLC program to the PLC in this controller, and how i can do it that, please ?
Alarm 064, "No program" in PLC.