lowelife
10-06-2007, 07:29 PM
I am using sheetcam 5.0.1, and need to know what post processor will work with dynacnc, the website is not loading the pp, need help
|
View Full Version : sheetcam 5.0.1 post processor for dynacnc lowelife 10-06-2007, 07:29 PM I am using sheetcam 5.0.1, and need to know what post processor will work with dynacnc, the website is not loading the pp, need help locost_cam 10-07-2007, 03:03 AM DynaCNC should have supplied a post but the THC300 post should work. DynaCNC 10-07-2007, 04:14 PM The post processor is located on the setup disk provided with every machine. If you can not find it please give us a call we aill be happy to provide it to you. |