Hi All,
I have a Chinese laser and it has a mpc05 control card but when I install the StepServo it comes up with mpc03 and it has a conflict. When I try to send a file to the laser the laser says download or com failure. Is the any one out there that can get me past this point. All help will be greatfull received.
Jim

Erase all the files and reinstall the software.

Hello Jim,
What software do you use?
I use Easycut4.0 software and MPC03 card to control my laser machine.


Regards,
Mongkol

Hello Jim,
What software do you use?
I use Easycut4.0 software and MPC03 card to control my laser machine.


Regards,
Mongkol

Hi Mongkol,
I am use lasercut 5.0 and have a mpc05 card in my laser. The problem I am having is the mpc03 comes up and there is a conflick on the computer. I am going to try to uninstall every thing and try to reinstall it again.

Regards
Jim

If need a software for mpc03 I caqn send , let me know your mail, mine is: lamicron@yahoo.es
Luis

Hi All,
Lasercut5.0 can use with mpc03-LV card or not. Please advise.


Regards,
Mongkol

If need a software for mpc03 I caqn send , let me know your mail, mine is: lamicron@yahoo.es
Luis

Hi Luis,
What software do you have?
You mean easycut software or not.

Cheers,
Mongkol

easycut 5.0, is ok.
Lasercut old, this one is the easiest one. and as you have the inside Pc card, the best for it.
Other one to use as a patch with corel draw, also can use it.
Luis

Hi Luis,
If I want to build laser machine, Where can I buy mpc03 card from?

Regards,
Mongkol

I was trying to find it, asked to some laser manufacturers and no one answer. If you are going to build , use other card as Kelling or xylotec and use mach3 software, good for cutting and for many other cnc stuff.
Luis